Waterers and drinking troughs

News from Grene

No news found.

		- -
		- -
		50 l, drinking/feeding trough, Ok Plastic no. 1100 Ok Plast drinking- / feeding trough no. 1100. 50 litres. Polypropylen. For fodder and water. W: 1200 mm D: 290 mm H: 410 mm· To be mounted on the wall. Remember big diks. Optimal solution for giving fodder and water to several animals at the same time. Weight 6 kg.
		Assembling fixture, La Buvette La Buvette assembling fixture Galvanised, for mounting on up to 2" and 3" posts. Fits F110, F130, F30 and F60 cups.
		Assembling fixtures, set, La Buvette La Buvette assembling fixture, set Fits F30, Forstal & Babylab cups. Galvanised, for mounting on up to 2" vertical pipe. Middle-middle measure 110 mm.
		Assembling pipe, insulated La Buvette assembling pipe, insulated. For 4 frost-proof waterers: Lakcho, Caldolac 5, Stalcho and Bigcho. For mounting in existing buildings. Heavy mounting pipes of polypropylen with isolation foam inside. Keeps water-supply frost-proof, both indoors and outdoors.
		Assembling pipe, insulated La Buvette assembling pipe, insulated For 4 frost-proof waterers: Lakcho, Caldolac 5, Stalcho and Bigcho. To be cast in new buildings, 40 cm below and 60 cm over the floor. Heavy-duty assembling pipes made of polyethylene with insulation foam inside. Keeps water connection frost-proof both indoors and outdoors.
		Assembly clamp Steel-Bracket 12mm For 70 x 70mm pipe F/Bowls w/80mm bolt-distance
		Back plates, Strangko Strangko back plates For NS61, Strangkolon, Hest, NS90/Taul T90K·
		Bicho 2 frost free drinking trough with floater -
		Bigstal 2 frost free drinking trough with flap -
		Circulation system La Buvette Proflow. Frost-protecting equipment for drinking water systems in stables. 3 KW Heating element with adjustable thermostat and Grundfoss circulation pump. Dimensioning: Depends on pipe's length and quantity of waterers/troughs. Perfect for up to 200 metres PE-pipe and 10 waterers
		Drinker with floater stainless, Polystall
		Drinking bowl for feeding pigs -
		Drinking bowl, Forstal FORSTAL Drinkingbowl With Tube-Valve. with 3/4" Tee-connection.
		Drinking cup, rustproof with pipe valve Stainless drinking trough with pipe valve For cattle and horses. Connection: 1 / 2 " inner pipe threading. Max. performance: 18 litres / min. The trough has a easy to drink from design, which provides easy access to the valve from 3 sides. Optimum valve position and water diffuser which prevents splashing and discomfort, hard water squirts, even at the valves max. yield of 18 litres per minute. The trough, which holds 3.5 litres, is fitted with heavy duty inwards shaped rounded edges, which also acts as a reinforcement. Mounted directly on wall or on pillar.
		Drinking trough, cast iron Strangko NS-61 drinking bowl With a stainless flap. Cast iron.
		Drinking trough, tiltable La Buvette tiltable trough. Especially suitable for open stables. Heavy galvanised frame with rustproof drinking trough. Available in 2 models: 1500 mm and 2200 mm. Three big advantages: - Low water level with large water flow up to 100 litres/minute. 3/4" water intake. - All cattle have clean water by high flow, and the trough stays partly clean since the animals eat fodder's remains. - Eminent lock-system can be locked in 3 positions.
		Drinkingbowl w/tubevalve
		Floater, universal Strong universal floater, which can give up to 100 litres/min. Connection 1" inner thread. To be mounted with pipe at the top. Bacause of big water flow the valve is very sensitive to impurities in the water, therefore it is recommended to use water filter 1601-184010.
		Forstal drinking cup with pipe valve -
		Frostfree drinker, Model H10 100W 24 V
		Geothermal frost protection Geometric frost protection Intake pipe for waterer or tap. Inner pipe full of gas, which uses the heat from earth to keep water pipe frost-free. Water connection 1/22" RG.
		Glass fuses for transformer Glass fuses for transformers. 5 x 20 mm
		Long trough La Buvette long trough 3 metres long, good quality. Supplied with 50 x 50 mm warm galvanised frame. Total height 600 mm. Total width 880 mm. No corners where dirt can be gathered. With 2 cleaning holes and 2 overflow holes. Can be prolonged by purchasing of 1 meter sections 1600-020835, which supplied including trough and frame, bolts and nuts.
		Pipe insulation Pipe insulation Tubolit pipe insulation, slit Length: 2 metres Economic and effective insulation of water pipes, heat pipes etc.
		Protective bracket for Forstal, La Buvette La Buvette protective bracket. For Forstal, F11 and F30. Protects against pushes and strokes from bigger animals
		Tension pieces Strangko tightening element For Strangkolon, NS61 and others
		Transformer for frost-proof waterers Transformers for frost-proof waterer with 24V heating element. Transforms voltage from 230V to 24V.
		Tube-set for circulation Tube-set for circulation 3/4" connection
		U-bracket for drinker, Fits H10 & F130-EL
		Water pipe for Aquaflow II Water pipe without thread for Aquaflow II RF 20 mm x 1100 mm·
		Water trough, Prebac 600, 1000 & 1500 La Buvette Prebac water trough Note!!! Supplied without floater Round trough for watering on the field made of impact- and UV-resistant polyethylen. The trough has splash edge and easy-accessible hole for cleaning. 8 years guarantee.
		Waterer with floater, galvanised Waterer Warm galvanised steel with adjustable floating valve. Capacity: 2,85 litres.
		Waterer, Multi 220S News from La Buvette Drinking trough floater with the swimmer. Multi-220S. Specially designed for cattle in loose housing. Made from heavy polyethylene. Weight 50 kg Valve 36 litres /minimum contents 145 litres. The trough is not frost resistant with heater element. Drinking Height: 60 cm. Large drain plug at the bottom for easy emptying and cleaning L: 230 cm W: 63 cm H: 76 cm.
		Waterer, cast iron, double with pipe valve La Buvette double waterer of cast iron, model F 60. Robust waterer made of poly-coated cast iron, with detachable spilling edge. Mounted with heavy adjustable pipe valve and built-in cleaning plug in the bottom. With double 1/2" RG connection for water circulation. Can be used as double waterer in tethered stalling.
		Waterer, cast iron, with floating valve La Buvette cast iron waterer Lac 5 With floating valve. Capacity appr. 26 litres/min. Connection 1/2" RG in the bottom, or for drilling directly on 3/4" water pipe. Strong waterer of poly coated cast iron. Built-in floater, with adjustable water level.
		Waterer, cast iron, with floating valve, double La Buvette double cast iron waterer, model Lac 55. Valve capacity appr. 26 litres/min. Connection 1/2" RG in the bottom, or for drilling directly on 3/4" water pipe. Strong waterer of poly coated cast iron. Built-in floater, with adjustable water level.
		Waterer, cast iron, with nose plate Grene waterer Cast iron with nose plate. Capacity 8-10 litres/min. 1/2" connection in top or bottom
		Waterer, cast iron, with pipe valve La Buvette cast iron waterer F 30. Heavy-duty watererof poly-coated cast iron with adjustable pipe valve. Capacity appr. 16 liter/min. Double 1/2" RG connection in the top, for water circulation
		Waterer, cast iron, with pipe valve La Buvette cast iron waterer Model Babylab. With pipe valve. Capacity up to 8 liter/min. Connection with 1/2" outer RG. Special sump hole under valve, where will be always some water left, learns young animal to drink from a waterer.
		Waterer, cast iron, with rust-proof plate La Buvette, F 11 Poly-coated cast iron with stainless plate. Capacity appr. 12 litres/min. 1/2" RG connection in top or bottom
		Waterer, frost-proof, Bigcho La Buvette frost-proof waterer. Bigcho. Cast aluminium, with adjustable floating valve. Built-in 24V/80W heating element, without transformer. Max. 12 litres/min. In case of outdoors use or extremely kow temperature can be equipped with additional 50 W heating element. To be mounted on La Buvette's insulated mounting pipe.
		Waterer, frost-proof, Caldolac 5 La Buvette frost-proof waterer Caldolac 5. Polypropylen, with adjustable floating valve. Built-in 24V/180W heat element with thermostat, without transformer. Max. 12 litres/min. Can stand extremely low temperature outdoors. To be mounted on La Buvette's insulated mounting pipe.
		Waterer, frost-proof, F130 electrical La Buvette frost-free waterer F130-el. Stainless waterer with enameled cast iron shape for wall mounting. Built-in 80W/24V heating element. Easy to clean with cleaning plug in the bottom. Frost-proof down to -20 degrees. 1/2" T-section on over- and under side.
		Waterer, frost-proof, Lakcho La Buvette frost-proof waterer Lakcho. Polypropylen, with adjustable float valve. Built-in 24V/80W heating element, without transformer. For indoors mounting. Max. 12 litres/min. Capacity up to 15 heads of cattle. To be mounted on La Buvete's insulated mounting pipe.
		Waterer, frost-proof, Stalcho La Buvette frost-proof waterer, model Stalcho. Polypropylen, with nose plate. Max. 12 litres/min. Built-in 24V/50W heating element, without transformer. For indoor mounting. To be mounted on La Buvette's insulated mounting pipe.
		Waterer, frost-proof, Stall 3000 La Buvette. Frost-free water trough with built-in thermostat. Max. 18 litres/min. 30 litres closed water container with 24V/150W heating element, which keeps water's temperature between 3 - 8 degrees C. Supplied without transformer.
		Waterer, frost-proof, Thermolac 40 La Buvette Thermolac 40 Insulated frost-proof drink basin. With 1 ball, frost-proof down to minus 20 degrees, if basin is used by at least 15 heads of cattle. Content 40 litres. Can supply up to 20 heads of cattle. Impact resistant plastic, polyethylen. Outer measure: (LxWxH) = 660x640x560 mm. Stays frost-proof because of heavy insulation and renewing of water. Basin's upper part can be easily dismounted for cleaning and adjusting of floating valve. Water connection: 1/2" RG under the bottom.
		Waterer, frost-proof, Thermolac 75 La Buvette Tharmolac 75 Insulated frost-proof waterer. With 2 balls, frost-proof down to minus 25 degrees if the trough is used by at least 15 heads of cattle. Content 75 litres. Can supply up to 40 heads of cattle.
		Waterer, frost-proof, tiltable La Buvette frost-proof and tiltable waterer. Specially for open stables. Length 2200 mm. Max. 100 litres/min. Equipped with 4 pcs. 24V 80W, heating elements. Heavy galvanised frame with rustproof drink trough. The three big advantages: - Low water level with high water flow up to 100 litres/min. 3/4" water intake. - All cattle receive clean water by the high flow, and the trough stays partly clean, since the animals eat fodder remains. - Eminent locking system can be locked in 3 different positions.
		Waterer, frost-proof, with heating element La Buvette, Isobac/Cleano-bac. Capacity: 40 heads of cattle. Isobac is kept frostproof by 2 pcs. of 24V - 50W heating elements. Isobac and Cleano-bac are made of impact resistant plastic, polyethylen. The special floating valve can be adjusted to very low water level (8 cm), which makes the trough self-cleaning because the cow will eat the remains of fodder. Capacity is 34 l/min., which gives enough water that 2 cows can drink at the same time. Used for cattle, horses and sheep. Because of trough's large water surface it is also very suitable for ostriches. Outer measure: (L x W x H) = 960 x 450 x 420 mm Weight: 10,5 kg
		Waterer, plastic La Buvette waterer, Prebac 90 Compact and robust water trough with built-in and protected floating valve. The trough is made of UV-resistant polyethylene and has splash edge and easy accessible cleaning hole. To be mounted on the foundation. Water connection 1/2" RG. Note, that Prebac 90 is specially designed for sheep, max. depth 200 mm. Capacity: 90 litres. Outer measure: (L x W x H) 1600 x 490 x 410. Weight: 14 kg.
		Waterer, plastic Prebac 70 La Buvette Prebac 70 water trough Impact- and UV-resistant polyethylen, with floater. The trough has splash edge and easy-accessible hole for cleaning . 8 years guarantee. Water connection 1/2" inside RG. Content: 70 litres. Valve capacity: Max. 48 litres/min. Measure: (LxWxH) 960 x 390 x 350 mm
		Waterer, plastic with floating valve La Buvette, Biglac 55. Low pressure water trough of impact resistant polyethylen, with floater. To be mounted on the water trailer or water tank, for example on the field, where water from waterworks is not accessible. Galvanised mounting frame on the back side. Capacity 55 litres. Measure: (LxWxH) 880 x 380 x 400 mm
		Waterer, plastic with vertical and lockable plate La Buvette plastic waterer Forstal. With vertical and lockable plate. Capacity 12 litres/minute. UV- and impact resistant polyethylene. Waterer's shape enshures large volume, easy inspection and cleaning. Can easily be adjusted to different group of animals and requirements about capacity. Valve has to be connected in the top or bottom 1/2" RG. To be mounted on the wall or by help of mounting bracket (extra equipment) on up to 2" vertical pipe.
		Waterer, plastic, Biglac 25 La Buvette plastic drinking trough, model Biglac 25. Impact resistant polyethylen with built-in floater. Measure: (LxWxH) 540 x 470 x 300 mm. Galvanised mounting frame on the back side. With splash edge and cleaning plug in the bottom. Content: 25 litres. Valve capacity appr. 48 litres/min.
		Waterer, plastic, Biglac 90 La Buvette plastic water trough, model Biglac 90. Impact resistant polyethylen with built-in floater. Measure: (LxWxH) 1600x400x400 mm Galvanised mounting frame on the back side. With splash edge and cleaning plug in the bottom. Content: 90 litres. Valve capacity appr. 48 litres/min.
		Waterer, plastic, Prebac 400 La Buvette Prebac 400. Trough for watering on the field, without floater Impact- and UV-resistant Polyethylen. The trough has splash edge and easy-accessible hole for cleaning. 8 years guarantee. Content: 400 litres. Measure: (LxWxH) 1500 x 640 x 640 mm
		Waterer, plastic, with plate La Buvette plastic waterer with plate Forstal. Max. 12 litres/min. Impact- and UV-resistant polyethylen. Can be connected in the top or bottom with 1/2" RG. To be mounted on the wall or on up to 2" pipe.
		Waterer, rustproof, F110 Inox with pipe valve La Buvette stainless drinking bowl with pipe valve. Sturdy drinking bowl completely in stainless steel with heavy duty brackets and rounded edges, that makes cup suitable for horses, cattle and sheep. Connect the valve 3/4 " pipe thread, and is prepared for circulation by the fitting of a stainless 3 / 4" T-piece. Adjustable mounting on the bracket from the 80 to 110 mm between the bolt holes. The valve provides up to 18 litres/minute. The bowl is mounted on wall or on vertical pipes if needed. Large drain plug for quick emptying and cleaning.
		Waterer, rustproof, F110 with pipe valve La Buvette rustproof waterer, model F110 Max. 18 litres/min. Stainless steel and impact- and UV-resistant polyethylene. Robust waterer with spilling edge, mounted with heavy pipe valve. It is recommended to use assembling fixture for mounting waterer on vertical pipe.
		Waterer, rustproof, F130 with pipe valve La Buvette waterer with pipe valve. Stainless steel and impact- and UV-resistant polyethylene. Max. 18 litres/min. Robust waterer with spilling edge, mounted with heavy pipe valve. With double 3/4" RG connection for water circulation. If mounting on vertical pipe, it is recommended to use mounting bracket.
		Waterer, rustproof, for piglets La Buvette B8 rustproof waterer For pigglets. Connection for 1/2" outer RG. Capacity 0,6 - 2,8 litres/minute. Stainless steel with long durability and very good hygiene. Reduces waste of water because of round form, which fits the animal's snout, so the animal is not being bothered during drinking. With built-in stop valve, which makes possible to dismount and adjust one valve without turning off the other waterers in the stable.
		Waterer, rustproof, for porkers La Buvette B15 rustproof waterer For porkers. Connection for 1/2" outer RG. Capacity 1,0-7,0 litres/min. Stainless steel with long durability and very good hygiene. Reduces waste of water because of the round form, which fits the animal's snout, so the animal is not being bothred during drinking. With built-in stop valve, which makes it possible to dismount and adjust valve without turning off the water for other valves in the stable.
		Waterer, rustproof, for sows La Buvette rustproof waterer, model B19. For sows. Connection for 1/2" outer RG. Capacity 0,6 - 2,8 litres/min. Stainless steel with long durability and very good hygiene. Reduces waste of water because because of its round shape, which fits the animal's snout and ensures that animal is not being bothered during drinking. With built-in stop valve, which makes possible to dismount and adjust valve without turning off the other waterers in the stable.
		Waterer, rustproof, for young porkers La Buvette B10 rustproof waterer For young pigglets. Connection for 1/2" outer RG. Capacity 0,6-2,8 litres/min. Reduces waste of water because of the round form, which fits the animal's snout, so the animal is not being bothred during drinking. With built-in stop valve, which makes it possible to dismount and adjust valve without turning off the water for other valves in the stable.
		Watertrough

Username:
Password:
Caps Lock is active.
Remember me

Forgot your password?
Register as user